|
TechSpec DPI
|
13091/13093 |
|
TechSpec Core Thickness (in)
|
2 |
|
TechSpec Applications
|
2008-2014 Subaru WRX--2008-2019 Subaru STI--2009-2013 Subaru Forester XT--2005-2009 Subaru Outback XT--2005-2009 Subaru Legacy GT |
|
TechSpec Overall Length (in)
|
21.8 |
|
TechSpec Core Height (in)
|
27.09 |
|
TechSpec Overall Height (in)
|
2.8 |
|
Install Difficulty
|
3 |
|
TechSpec Rows
|
3 |
|
TechSpec Inlet (in)
|
1.54 |
|
TechSpec Outlet (in)
|
1.54 |
|
TechSpec Core Length (in)
|
13.39 |
|
SellingPoint06
|
3-row design creates more air turbulence, maximizing cooling efficiency. |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Fluid Capacity (gal)
|
N/A |
|
TechSpec Material
|
N/A |
|
TechSpec Engine Codes
|
EJ255--EJ257 |
|
TechSpec Chassis Codes
|
GE--GH |
|
TechSpec Drain Plug Thread Size
|
M12 x 1.5 |
|
SellingPoint10
|
Mishimoto Lifetime Warranty |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint08
|
Two-way expansion tank cap and one-way radiator cap ensure proper flow and function of cooling system to avoid overheating |
|
SellingPoint02
|
Premium radiator has 3-row (2” thick) core for improved strength and reliability |
|
SellingPoint03
|
16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency |
|
SellingPoint04
|
Greater density of rows for higher cooling capacity. |
|
SellingPoint05
|
More contact points for additional heat transfer. |
|
SellingPoint09
|
Includes Magnetic Drain Plug to capture any metallic debris/fragments in your cooling system |
|
TechSpec Note
|
This item is for Manual Transmission vehicles. For automatic applications, please purchase optional Mishimoto Universal Transmission Cooler Kit.--Caution--The provided Mishimoto two-way cap (six-sided design) should replace the stock cap located on the expansion tank. The Mishimoto Performance Aluminum Radiator should utilize the included one-way cap (circular design with non-directional sticker).--It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected] to the additional thickness of our 3-row X-Line radiator, trimming the upper hose may be necessary.--Use small fitting for:--2008-2009 Subaru WRX--2008-2019 Subaru STI----Use large fitting for:--2010-2014 Subaru WRX--2005-2009 Subaru Legacy GT--2005-2009 Subaru Outback XT--2009-2013 Subaru Forester XT |
|
TechSpec Includes
|
(1) Mishimoto Radiator--(1) Mishimoto Two-Way Radiator Cap--(1) Mishimoto One-Way Radiator Cap--(2) Overflow Ports--(1) Magnetic Drain Plug--Fan Mounting Hardware--Mishimoto Lifetime Warranty |
|
SellingPoint07
|
Now includes two 1.3 bar high-pressure caps, raising the boiling point of engine coolant to provide a safer, more efficient system |
|
SellingPoint01
|
Direct fit for the 2008-2014 Subaru WRX/2008-2021 STI |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Overall Width (in)
|
2.5 |
|
Fluid Capacity
|
0 |
|
Inlet Diameter
|
1.54 |
|
Outlet Diameter
|
1.54 |
|
Core Length
|
13.39 |
|
Core Thickness
|
2 |
|
Overall Width
|
2.5 |
|
Overall Length
|
21.8 |
|
Core Height
|
27.09 |
|
Overall Height
|
28 |
|
Core Row Quantity
|
3 |
|
Core Material
|
Aluminum |
|
Outlet Location
|
Bottom Left |
|
Down Flow Or Cross Flow Type
|
Down Flow |
|
Drain Plug Thread Size
|
M12 - 1.5 |
|
Transmission Oil Cooler Fitting Type
|
N/A |
|
Transmission Oil Cooler Included
|
No |
|
Inlet Location
|
Top Left |
|
Core Finish
|
Uncoated |
|
Drain Plug Included
|
Yes |
|
Radiator Cap Included
|
Yes |
