LIQUI MOLY Multi-Purpose Absorbent - 7250

Powerful 100 % polyurethane hard foam-based oil absorbent. Absorbs all oil-based fluids but will not retain water which makes it more efficient when cleaning oil spills, especially in a wet environment. Use to clean oil, fuel and water repellant fluids. May be used indoors or outdoors. Safe for use in almost any industry including fire dept. and tow services.

Note: Particularly with large-area applications, unknown liquids or mixtures, first check the compatibility of the absorbing liquid with LIQUIMOLY Oil Binder. Apply Oil Binder in a layer that is 5mm thick on the liquid to be removed and remove after sufficient time for the product to take effect. Absorption effect can be improved and accelerated by sweeping back and forth with hard broom. For use in conventional spreaders. When pouring the sack, please make note of the direction and strength of the wind as well as general protective measures. In addition, the ignition hazards resulting from electrostatic charges must be observed. According to the declaration by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety dated 3/12/1990 in GMBI no.18 S.337, sufficient cleaning of traffic areas requires at least two applications of binders and subsequent cleaning with a 1% wetting agent solution and water. The wetting agent solution must be disposed of through reabsorption, where possible. For disposal measures following use, observe the relevant regulations and legal specifications valid for the absorptively bound substance.