|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Rows
|
19 |
|
SellingPoint03
|
19-row stacked-plate oil cooler is front mounted for maximum airflow |
|
SellingPoint01
|
20 F (6.7 C) temperature decrease compared to using only the stock transmission cooler |
|
TechSpec Applications
|
2015-2021 Subaru WRX |
|
TechSpec Installation Notes
|
22 in-lbs recommended for all worm-gear clamps.--These clamps have an operating range of 18-27 in- 2-3NM.--Do not exceed the maximum torque rating of 27 in-lbs----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
Install Difficulty
|
3 |
|
TechSpec Core Height (in)
|
5.43 |
|
SellingPoint08
|
Adds approximately 1 qt of transmission fluid |
|
TechSpec Includes
|
Application-Specific Mounting Brackets--19-Row Oil Cooler--6-ft Rubber Transmission Hose, 3/8-in I.D.--45 -10AN to 3/8-in Barbed Push-On Fittings--Worm-Gear Clamps--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
SellingPoint07
|
Cooler available in Sleek Silver or Stealth Black |
|
SellingPoint02
|
Direct fit with no cutting or modification to the vehicle |
|
TechSpec Engine Codes
|
FA20DIT |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
SellingPoint09
|
Mishimoto Lifetime Warranty |
|
SellingPoint04
|
Mounting brackets include provisions for aftermarket horns |
|
SellingPoint10
|
N/A |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
OptionLabel
|
Silver |
|
TechSpec Note
|
This will add approximately 1 qt. of CVT transmission fluid. The transmission fluid is called ñHT CVT Fluid" and it can be purchased at any Subaru dealer.--Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Chassis Codes
|
VA |
|
SellingPoint05
|
Works in conjunction with the stock transmission cooler |
|
SellingPoint06
|
Works with the Mishimoto engine oil cooler kit |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
