|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Drain Plug Thread Size
|
N/A |
|
TechSpec Includes
|
N/A |
|
TechSpec Applications
|
2019-2022 Hyundai Veloster Turbo |
|
TechSpec Engine Codes
|
Gamma 1.6T |
|
TechSpec Chassis Codes
|
N/A |
|
TechSpec Catch Can Diameter (in)
|
N/A |
|
TechSpec Height (in)
|
N/A |
|
Material
|
6061 Aluminum |
|
Installation Difficulty
|
2 |
|
Finish
|
Anodized |
|
Color
|
Black |
|
TechSpec Material
|
N/A |
|
SellingPoint06
|
Molded hoses include pre-attached, stock-style quick-disconnect fittings for a true plug-and-play install |
|
SellingPoint07
|
Billet 6061 aluminum sealed can |
|
SellingPoint08
|
Defends intake system and essential components from oil blow-by |
|
SellingPoint09
|
Helps maintain proper octane levels to reduce potential detonation |
|
SellingPoint10
|
Filter and can are fully serviceable |
|
SellingPoint11
|
Internal air diverter turbulates air longer to improve oil separation |
|
SellingPoint12
|
Mishimoto Lifetime Warranty |
|
SellingPoint13
|
Patent Nos. US ZL 202120175368.7, US ZL 201830621732.1, US D884,760 |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Installation Notes
|
22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM) |
|
TechSpec Note
|
After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle. |
|
SellingPoint01
|
Direct fit for the 2019-2022 Hyundai Veloster Turbo |
|
SellingPoint02
|
Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter |
|
SellingPoint03
|
Installs in under 30 minutes |
|
SellingPoint04
|
Robust, application-specific bracket mounts the can in a serviceable location |
|
SellingPoint05
|
Catch can has a 2 oz. capacity for longer servicing intervals |
|
Can Finish
|
Anodized |
|
Drain Plug Included
|
Yes |
|
Height
|
3.7 |
|
Hose Included
|
Yes |
|
Inlet Port Inside Diameter
|
0.6 |
|
Inlet Port Quantity per Can
|
1 |
|
Interior Baffle
|
Yes |
|
Maximum Can Capacity
|
3 |
|
Mounting Bracket Included
|
Yes |
|
Outlet Port Inside Diameter
|
0.6 |
|
Outlet Port Quantity per Can
|
1 |
|
Install Difficulty
|
3 |
|
Can Material
|
6061-T6 Billet Aluminum |
|
Can Outside Diameter
|
2.5 |
|
Prop 65 Y/N
|
Y |
|
Can Type
|
Twist Off |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
