|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
N/A |
|
TechSpec Core Height (in)
|
N/A |
|
TechSpec Core Thickness (in)
|
N/A |
|
TechSpec Engine Codes
|
LT1 |
|
TechSpec Chassis Codes
|
Alpha |
|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
TechSpec Overall Height (in)
|
12.95 |
|
TechSpec Overall Length (in)
|
8.35 |
|
TechSpec Overall Width (in)
|
1.97 |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Includes
|
Application Specific Mounting Brackets w/ Corrosion Resistant Mounting Hardware--Horn Relocation Mounting Bracket--25 Row Oil Cooler--4ft 9in Stainless Steel Braided Hose with 45 and 90 -10AN Fittings--3ft 9in Stainless Steel Braided Hose with 90 -10AN Fittings--Banjo Fitting with Bolt M20 x -10AN + Dowty Seals, Black--45 Female -10AN Swivel to Male Adapter, Black--M22 Oil Sandwich Plate--M22 x 1.5 Sandwich Plate Adapter--M20 x -10AN Sandwich Plate Fitting with Dowty Seal, Black--1ft Thermal Heat Wrap--Mishimoto Lifetme Warranty |
|
TechSpec Applications
|
N/A |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Note
|
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit. |
|
SellingPoint02
|
Reduces oil temperatures by up to 40F |
|
SellingPoint03
|
Application-specific mounting brackets |
|
SellingPoint04
|
Premade braided stainless steel oil lines with durable -AN fittings |
|
SellingPoint05
|
Includes billet aluminum oil sandwich plate or thermostatic oil sandwich plate |
|
SellingPoint06
|
25-row stacked-plate oil cooler for optimal reduction in fluid temperature |
|
SellingPoint07
|
Cooler available in Sleek Silver or Stealth Black |
|
SellingPoint08
|
Mishimoto Lifetime Warranty |
|
SellingPoint09
|
N/A |
|
SellingPoint10
|
N/A |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
N/A |
|
OptionLabel
|
Silver, Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Rows
|
25 |
|
SellingPoint01
|
Direct fit for the 2016-2024 Chevrolet Camaro SS |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
0 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
0 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
Width
|
1.97 |
|
Base Height
|
12.95 |
|
Color
|
Silver |
|
Core Color
|
Silver |
|
Core Height
|
0 |
