|
TechSpec Rows
|
19 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Core Height (in)
|
5.43 |
|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Engine Codes
|
2.0L EcoBoost |
|
TechSpec Chassis Codes
|
C-Car Platform |
|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Includes
|
Application-Specific Mounting Brackets and Spacer--19-Row Oil Cooler--3-ft, 8-in Stainless Steel Braided Hose with Straight and 90 Degree -10AN Fittings--2-ft, 11-in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings--Thermostatic Sandwich Plate--¾-in x 16-in Stainless Steel Sandwich Plate Adapter--M20 x -10AN Straight Fittings--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
TechSpec Applications
|
N/A |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Note
|
This kit is designed to work by removing the active grill shutters to obtain maximum airflow to the oil cooler--This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit--Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Inlet
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
SellingPoint01
|
Direct fit for the 2013-2018 Ford Focus ST |
|
SellingPoint02
|
Reduces oil temperatures by 30 F (16.7 C) |
|
SellingPoint03
|
Minimal pressure drop |
|
SellingPoint04
|
Application-specific mounting brackets |
|
SellingPoint05
|
Oil cooler location does not interfere with aftermarket air intakes |
|
SellingPoint06
|
Works with stock and all aftermarket front mount intercooler kits |
|
SellingPoint07
|
Pre-made stainless steel braided oil lines with durable -AN fittings |
|
SellingPoint08
|
Billet aluminum oil sandwich plate |
|
SellingPoint09
|
19-row stacked-plate oil cooler for optimal fluid temperature reduction |
|
SellingPoint10
|
Thermostatic and Non-thermostatic options available |
|
SellingPoint11
|
Cooler available in either Sleek Silver or Stealth Black |
|
SellingPoint12
|
Increases oil capacity by .65qt |
|
SellingPoint13
|
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit |
|
SellingPoint14
|
Mishimoto Lifetime Warranty |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
3 |
|
OptionLabel
|
Black Cooler, Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Base Height
|
0 |
|
Color
|
Black |
|
Core Color
|
Black |
|
Core Height
|
5.43 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
1.97 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
11 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
Width
|
0 |
