|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Includes
|
Application Specific Mounting Brackets--19-Row Oil Cooler--2-ft 8-in Stainless Steel Braided Hose w/ -10AN Fittings--3-ft 6.5-in Stainless Steel Braided Hose w/ -10AN Fittings--M20 Sandwich Plate--Stainless Steel Sandwich Plate Adapter, M20--Banjo Fitting w/ Bolt M20 x -10AN, Black--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
TechSpec Applications
|
2010+ Hyundai Genesis w/ 2.0T |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Note
|
N/A |
|
SellingPoint01
|
Direct fit for the 2010-2012 Hyundai Genesis Coupe 2.0T |
|
SellingPoint02
|
Application-specific mounting brackets |
|
SellingPoint03
|
Premade braided stainless steel oil lines with durable -AN fittings |
|
SellingPoint04
|
Billet aluminum oil sandwich plate in standard or thermostatic form |
|
SellingPoint05
|
19-row stacked-plate oil cooler for optimal fluid temperature reduction |
|
SellingPoint06
|
Proven to reduce oil temperatures by 20 F (16 C) |
|
SellingPoint07
|
Easily installs in less than two hours |
|
SellingPoint08
|
Compatible with all Mishimoto Genesis 2.0T products |
|
SellingPoint09
|
Increases oil capacity by .65 qt |
|
SellingPoint10
|
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit |
|
SellingPoint11
|
Mishimoto Lifetime Warranty |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
3 |
|
OptionLabel
|
Black Cooler, Non-Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Chassis Codes
|
BK |
|
TechSpec Engine Codes
|
G4KF |
|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Core Height (in)
|
5.43 |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Rows
|
19 |
|
Base Height
|
0 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
Width
|
0 |
|
Color
|
Black |
|
Core Color
|
Black |
|
Core Height
|
5.43 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
1.97 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
11 |
