|
TechSpec Rows
|
19 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Core Height (in)
|
5.43 |
|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Engine Codes
|
N/A |
|
TechSpec Chassis Codes
|
ND |
|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Includes
|
Application Specific Mounting Brackets w/ Corrosion Resistant Mounting Hardware--19-Row Oil Cooler--3-ft, 9-in Stainless-Steel Braided Hose with Straight and 45 / 120 Degree -10AN Fittings--4-ft, 7-in Stainless-Steel Braided Hose with 45 Degree and 45 / 120 Degree -10AN Fittings--Oil Sandwich Plate--M20 Extended Length Stainless-Steel Sandwich Plate Adapter--10mm 6061 Aluminum Sandwich Plate Spacer--O-rings--Banjo Fitting w/ Bolt M20 x -10AN, Black--Mounting Hardware Set |
|
TechSpec Applications
|
2016-2018 Mazda Miata |
|
SellingPoint02
|
19-row stacked-plate oil cooler drops temperatures up to 57F (29.5C) |
|
SellingPoint03
|
Minimal pressure drop |
|
SellingPoint04
|
Application-specific mounting brackets mount the oil cooler in the front bumper |
|
SellingPoint05
|
Mounting brackets made from aluminum for a lightweight design |
|
SellingPoint01
|
Direct-fit for the 2016-2018 Mazda MX-5 Miata |
|
TechSpec Note
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
SellingPoint06
|
Pre-made stainless steel braided oil lines with durable -AN fittings |
|
SellingPoint07
|
Billet aluminum thermostatic oil sandwich plate |
|
SellingPoint08
|
Thermostatic and Non-thermostatic options available |
|
SellingPoint09
|
Cooler available in either Sleek Silver or Stealth Black |
|
SellingPoint10
|
Increases oil capacity by .75 qt |
|
SellingPoint11
|
Mishimoto Lifetime Warranty |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
3 |
|
OptionLabel
|
Silver Cooler, Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Base Height
|
0 |
|
Color
|
Silver |
|
Core Color
|
Silver |
|
Core Height
|
5.43 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
1.97 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
11 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
Width
|
0 |
