|
SellingPoint08
|
Cooler available in either Sleek Silver or Stealth Black |
|
SellingPoint09
|
Increases oil capacity by 0.5 qt |
|
SellingPoint10
|
Mishimoto Lifetime Warranty |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
3 |
|
OptionLabel
|
Black Cooler, Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Rows
|
10 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Core Height (in)
|
2.76 |
|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Engine Codes
|
1.8L BP |
|
TechSpec Chassis Codes
|
NB |
|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Includes
|
Application Specific Mounting Brackets--Application Specific Oil Cooler Ducts--10-Row Oil Cooler--1ft Stainless Steel Braided Hose w/ 120 Degree -10AN Fittings--1ft 9.5in Stainless Steel Braided Hose w/ 90 Degree and 120 Degree -10AN Fittings--M20 Thermostatic Sandwich Plate--M20 Stainless Steel Sandwich Plate Adapter--M20 x -10AN Straight Fittings--Large O-ring--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
TechSpec Applications
|
N/A |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Note
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ft Do not exceed the maximum torque rating of 35 ft-lb----The installation of this kit requires cutting the plastic undertray. OEM part number for plastic undertray is NA01-56-111F.----During our testing, we had no issues with oil cooler damage, but if concerned, we recommend purchasing window screen or chicken wire to provide additional protection to the oil cooler core. |
|
SellingPoint01
|
Direct fit for the 1999-2005 Mazda Miata NB |
|
SellingPoint02
|
Reduces oil temperatures by 10F (5.6C) |
|
SellingPoint03
|
Mounting brackets also serve as ducting to channel air to cooler |
|
SellingPoint04
|
Minimal pressure drop |
|
SellingPoint05
|
Works with most aftermarket turbo kits |
|
SellingPoint06
|
Premade stainless steel braided oil lines with durable -10AN fittings |
|
SellingPoint07
|
Billet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature |
|
Base Height
|
0 |
|
Color
|
Black |
|
Core Color
|
Black |
|
Core Height
|
2.76 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
1.97 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
11 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
Width
|
0 |
