|
TechSpec Rows
|
19 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Core Height (in)
|
5.43 |
|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Engine Codes
|
2.3 EcoBoost |
|
TechSpec Chassis Codes
|
S-550 |
|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Includes
|
Application-Specific Mounting Brackets and Spacer--19-Row Oil Cooler--4-ft 3.5-in Stainless Steel Braided Hose with 45 and 120 -10AN Fittings--4-ft 10.5-in Stainless Steel Braided Hose with 90 and 120 -10AN Fittings--Oil Sandwich Plate--3/4 x 16 Stainless Steel Sandwich Plate Adapter--M20 x -10AN Straight Fittings--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
TechSpec Applications
|
N/A |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Note
|
To provide maximum airflow to the front of your vehicle and the EcoBoost oil cooler, Mishimoto suggests disconnecting the connector for the front shutter doors--Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
SellingPoint01
|
Direct fit for 2015-2017 Ford Mustang EcoBoost |
|
SellingPoint02
|
Reduces oil temperatures by up to 40 F (23 C) |
|
SellingPoint03
|
Minimal pressure drop |
|
SellingPoint04
|
Application-specific mounting bracket |
|
SellingPoint05
|
Premade braided stainless steel oil lines with durable -AN fittings |
|
SellingPoint06
|
Includes billet aluminum oil sandwich plate or thermostatic oil sandwich plate |
|
SellingPoint07
|
19-row stacked-plate oil cooler for optimal reduction in fluid temperature |
|
SellingPoint08
|
Thermostatic and Non-thermostatic options available |
|
SellingPoint09
|
Cooler available in Sleek Silver and Stealth Black |
|
SellingPoint10
|
Increases oil capacity by 0.75 qt |
|
SellingPoint11
|
Mishimoto Lifetime Warranty |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
3 |
|
OptionLabel
|
Black Cooler, Non-Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Base Height
|
0 |
|
Color
|
Black |
|
Core Color
|
Black |
|
Core Height
|
5.43 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
1.97 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
11 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
Width
|
0 |
