|
TechSpec Rows
|
12 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
18.5 |
|
TechSpec Core Height (in)
|
N/A |
|
TechSpec Core Thickness (in)
|
N/A |
|
TechSpec Engine Codes
|
5.0 Coyote |
|
TechSpec Chassis Codes
|
S-550 |
|
TechSpec Installation Notes
|
N/A |
|
TechSpec Caution
|
Requires the removal of the stock coolant based oil cooler--Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
31.7 |
|
TechSpec Overall Width (in)
|
10.5 |
|
TechSpec Inlet
|
-10AN |
|
TechSpec Outlet
|
-10AN |
|
TechSpec Includes
|
Application Specific Mounting Bracket / Air Diversion Shield--Bar and Plate Oil Cooler--2ft 5in Stainless Steel Braided Hose w/ -10AN Fittings--4ft 11in Stainless Steel Braided Hose w/ -10AN Fittings--M22 Thermostatic Sandwich Plate--Application - Specific, M22 x 1.5 extended length center bolt--M20 x -10AN Straight Fittings--1/8-in NPT Plugs--Large O-ring--Lower Radiator Hose w/ worm gear clamps--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
SellingPoint01
|
Direct fit for the 2015-2017 Ford Mustang GT (LHD) |
|
SellingPoint02
|
Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers |
|
SellingPoint03
|
Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler |
|
SellingPoint04
|
Pre-made stainless steel braided oil lines with durable -AN fittings |
|
TechSpec Note
|
N/A |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Applications
|
2015-2017 Ford Mustang GT (Left Hand Drive vehicles only) |
|
SellingPoint05
|
Comes with replacement lower radiator hose to bypass the stock fluid-based oil cooler |
|
SellingPoint06
|
Removes the stock fluid-based oil cooler for less stress on the engine's cooling system |
|
SellingPoint07
|
Billet aluminum thermostatic oil sandwich plate |
|
SellingPoint08
|
Increases oil capacity by 1qt |
|
SellingPoint09
|
Fits with most aftermarket supercharger kits |
|
SellingPoint10
|
Mishimoto Lifetime Warranty |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
4 |
|
OptionLabel
|
Silver, Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Base Height
|
0 |
|
Color
|
Silver |
|
Core Color
|
Silver |
|
Core Height
|
0 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
0 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
18.5 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0.625 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0.625 |
|
Width
|
10.5 |
