|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Includes
|
Application Specific Mounting Brackets--19-Row Oil Cooler--2-ft 8-in Stainless Steel Braided Hose w/ -10AN Fittings--M20 Sandwich Plate--Stainless Steel Sandwich Plate Adapter, 3/4-in -16--Banjo Fitting w/ Bolt M20 x -10AN, Black--1/8-in NPT Plugs--Large O-ring--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
TechSpec Applications
|
2007-2011 Jeep Wrangler--2007-2011 Jeep Wrangler Unlimited |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Note
|
This kit comes with MMOP-SPTR, our sandwich plate with rear-mounted thermostat. Mishimoto does not recommend using MMOP-SPT due to suspension clearance issues.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ft. Do not exceed the maximum torque rating of 35 ft-lb----It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
Install Difficulty
|
3 |
|
OptionLabel
|
Silver Cooler, Non-Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
SellingPoint01
|
Direct fit for the 2007-2011 Jeep Wrangler JK |
|
SellingPoint02
|
Application-specific mounting brackets |
|
SellingPoint03
|
Premade braided stainless steel oil lines with durable -AN fittings |
|
SellingPoint04
|
Billet aluminum oil sandwich plate in standard or thermostatic form |
|
SellingPoint05
|
19-row stacked-plate oil cooler for optimal fluid temperature reduction |
|
SellingPoint06
|
Reduces oil temperatures by up to 40-degrees |
|
SellingPoint07
|
Compatible with all Mishimoto JK Wrangler parts |
|
SellingPoint08
|
Increases oil capacity by 0.75qt |
|
SellingPoint09
|
Mishimoto Lifetime Warranty |
|
SellingPoint10
|
N/A |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Rows
|
19 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Core Height (in)
|
5.43 |
|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Engine Codes
|
EGH |
|
TechSpec Chassis Codes
|
JK |
|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
Base Height
|
0 |
|
Color
|
Silver |
|
Core Color
|
Silver |
|
Core Height
|
5.43 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
1.97 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
11 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
Width
|
0 |
