|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Engine Codes
|
EJ255 |
|
TechSpec Chassis Codes
|
GH--GE--GR--GV |
|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
TechSpec Includes
|
Application Specific Mounting Brackets and Spacer--19-Row Oil Cooler--2ft, 11in Stainless Steel Braided Hose with 45-degree and 150-degree -10AN Fittings--3ft, 6in Stainless Steel Braided Hose with 45-degree and 90-degree -10AN Fittings--M20 Thermostatic Sandwich Plate--15mm CNC Sandwich Plate Spacer--Application specific M20 Sandwich Plate Adapter--M20 x -10AN Straight Fittings--2ft of thermal reflective wrap--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
TechSpec Applications
|
N/A |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Note
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
SellingPoint01
|
Direct fit for the 2008-2014 Subaru WRX |
|
SellingPoint02
|
Proven 25 F (13.9 C) drop in oil temperature |
|
SellingPoint03
|
Full bolt-on oil cooling solution for street and track vehicles |
|
SellingPoint04
|
No modification necessary for installation, functions with all stock equipment |
|
SellingPoint05
|
19-row oil cooler strategically mounted in the lower grille for maximum airflow |
|
SellingPoint06
|
CNC-machined application-specific sandwich plate |
|
SellingPoint07
|
Works in conjunction with stock liquid-to-liquid heat exchanger for proper fluid warm-up and regulation |
|
SellingPoint08
|
Includes preassembled stainless steel braided oil lines with -10AN fittings |
|
SellingPoint09
|
Cooler available in Sleek Silver or Stealth Black |
|
SellingPoint10
|
Increases oil capacity by 0.75 qt |
|
SellingPoint11
|
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit |
|
SellingPoint12
|
Mishimoto Lifetime Warranty |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
3 |
|
OptionLabel
|
Silver Cooler, Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Rows
|
19 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Core Height (in)
|
5.43 |
|
Base Height
|
0 |
|
Color
|
Silver |
|
Core Color
|
Silver |
|
Core Height
|
5.43 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
1.97 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
11 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
Width
|
0 |
