|
TechSpec Rows
|
19 |
|
TechSpec Core Construction
|
N/A |
|
TechSpec Core Length (in)
|
11 |
|
TechSpec Core Height (in)
|
5.43 |
|
TechSpec Core Thickness (in)
|
1.97 |
|
TechSpec Engine Codes
|
FA20DIT |
|
TechSpec Chassis Codes
|
VA |
|
TechSpec Installation Notes
|
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
|
TechSpec Caution
|
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Inlet
|
N/A |
|
TechSpec Outlet
|
N/A |
|
SellingPoint04
|
No modification necessary for installation |
|
SellingPoint05
|
Billet aluminum thermostatic oil sandwich plate allows oil to reach optimum temperature |
|
SellingPoint06
|
19-row oil cooler strategically mounted in the lower grille for maximum airflow |
|
SellingPoint07
|
CNC-machined aluminum spacer for the oil sandwich plate |
|
SellingPoint08
|
Silicone hose bypasses stock liquid-to-liquid heat exchanger |
|
SellingPoint09
|
Includes preassembled stainless steel braided oil lines with -10AN fittings |
|
SellingPoint10
|
Cooler available in Sleek Silver or Stealth Black |
|
SellingPoint11
|
Increases oil capacity by 0.75 qt |
|
SellingPoint12
|
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit |
|
SellingPoint13
|
Mishimoto Lifetime Warranty |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
N/A |
|
OptionLabel
|
Black Cooler, Thermostatic |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Base Height
|
0 |
|
Color
|
Black |
|
Core Color
|
Black |
|
Core Height
|
5.43 |
|
Core Row Quantity
|
0 |
|
Core Thickness
|
1.97 |
|
Core Type
|
Bar-and-Plate |
|
Core Width
|
11 |
|
Finish
|
Anodized |
|
Fluid Capacity
|
0 |
|
Grade Type
|
Performance |
|
Inlet Fitting Gender
|
Male |
|
Inlet Fitting Type
|
AN Flare |
|
Inlet Outside Diameter
|
0 |
|
Outlet Fitting Gender
|
Male |
|
Outlet Fitting Type
|
AN Flare |
|
Outlet Outside Diameter
|
0 |
|
SellingPoint03
|
Full bolt-on oil cooling solution for street and track vehicles |
|
SellingPoint02
|
Proven 20 F (11.1 C) drop in oil temperature |
|
SellingPoint01
|
Direct fit for the 2015-2021 Subaru WRX |
|
TechSpec Note
|
THIS OIL COOLER KIT WILL NOT FIT WITH THE MISHIMOTO 2015+ WRX FRONT-MOUNT INTERCOOLER KIT |
|
TechSpec Fluid Capacity (qts)
|
N/A |
|
TechSpec Applications
|
2015-2021 Subaru WRX |
|
TechSpec Includes
|
Application-Specific Mounting Brackets--Application-Specific Oil Sandwich Plate--19-Row Oil Cooler--4ft Stainless Steel Braided Hose w/ 45 and 90 -10AN Fittings--5ft Stainless Steel Braided Hose w/ 45 and 90 -10AN Fittings--Stainless Steel Sandwich Plate Adapter, M20 x M20--Banjo Fitting w/ Bolt M20 x -10AN, Black--Large O-Ring--Mounting Hardware Set--Mishimoto Lifetime Warranty |
|
Width
|
0 |
