|
TechSpec Applications
|
2001-2007 Lancer Evolution 7/8/9 GSR--2005-2007 Lancer Evolution 8/9 MR |
|
TechSpec Engine Codes
|
4G63 |
|
TechSpec Chassis Codes
|
CT9A |
|
TechSpec Maximum Recommended Boost Pressure (PSI)
|
N/A |
|
TechSpec Maximum Recommended Horsepower
|
N/A |
|
TechSpec Overall Length (in)
|
31.5 |
|
TechSpec Overall Height (in)
|
14.5 |
|
TechSpec Overall Width (in)
|
5.75 |
|
TechSpec Core Type
|
Bar-and-Plate |
|
TechSpec Core Thickness (in)
|
N/A |
|
TechSpec Core Length (in)
|
22 |
|
TechSpec Core Height (in)
|
11.65 |
|
TechSpec Inlet (in)
|
2.375 |
|
TechSpec Outlet (in)
|
2.5 |
|
TechSpec Weight (lbs)
|
27 |
|
TechSpec Note
|
This intercooler can be used with stock or aftermarket intercooler pipes. This intercooler is not universal and has application specific mounting points. The upper intercooler pipes are not designed to work with the stock airbox. An aftermarket open element air filter is required to use with these upper intercooler pipes. |
|
TechSpec Includes
|
(1) Mishimoto Intercooler--(2) Upper Intercooler Pipes--(1) Lower Intercooler Pipe--(3) Upper Pipe Couplers--(2) Lower Pipe Couplers--(1) 3-in T-bolt Clamp--(8) 2.75-in T-bolt Clamps--(1) 2-in T-bolt Clamp--Mishimoto Lifetime Warranty |
|
TechSpec Installation Notes
|
N/A |
|
TechSpec Pipe Shape
|
N/A |
|
TechSpec Pipe Diameter
|
N/A |
|
TechSpec Pipe Length
|
N/A |
|
TechSpec Centerline Radius
|
N/A |
|
SellingPoint01
|
Direct-fit kit for the Mitsubishi Lancer Evolution 7/8/9 |
|
SellingPoint02
|
Large, 3.5-in thick bar-and-plate core with strategic core composition for optimal cooling and minimal pressure loss |
|
SellingPoint03
|
Provided 8 whp / 10 wtq and reduced intake temperatures by 28 F (16 C) compared to the stock cooler on a vehicle making 350 whp |
|
SellingPoint04
|
Provides efficient intake temperature reduction for vehicles from stock to 600 whp |
|
SellingPoint05
|
All-aluminum cast end tanks provide improved airflow, superior air dispersion through the core, and exceptional strength |
|
SellingPoint06
|
Lightweight, mandrel-bent, polished aluminum pipes eliminate restrictive bends in the stock piping for improved airflow |
|
SellingPoint07
|
Bead-rolled pipe ends prevent boost leaks and coupler disconnection |
|
SellingPoint08
|
Silicone couplers provide increased heat and pressure tolerance |
|
SellingPoint09
|
Available with a Sleek Silver or Stealth Black powder-coated finish |
|
SellingPoint10
|
Mishimoto Lifetime Warranty |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
CARB EO Number
|
D-759 |
|
Install Difficulty
|
3 |
|
OptionLabel
|
Black |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
End Tank Material
|
Aluminum |
|
Grade Type
|
Performance |
|
Hose Clamps Included
|
Yes |
|
Hot Side Pipe Inside Diameter
|
2.375 |
|
Inlet Diameter
|
2.375 |
|
Outlet Diameter
|
2.5 |
|
Intercooler Type
|
Air-to-Air |
|
Maximum Boost Pressure
|
0 |
|
Maximum Horsepower
|
0 |
|
Pipe Color
|
Black |
|
Pipe Finish
|
Powder Coated |
|
Pipe Material
|
Aluminum |
|
Universal Or Specific Fit
|
Specific |
|
Cold Side Pipe Inside Diameter
|
2.5 |
|
Core Thickness
|
0 |
|
Core Length
|
22 |
|
Core Height
|
11.65 |
|
Core Color
|
Black |
|
Core Construction
|
Bar-and-Plate |
|
Core Material
|
Aluminum |
|
Coupler Color
|
Black |
|
Coupler Material
|
Silicone |
|
End Tank Construction
|
Cast |
