|
TechSpec Includes
|
(1) Bar-and-Plate Intercooler--(1) Optional Charge-Pipe--(1) Intercooler Mounting Bracket--(1) Air Diverter with Attached Rubber Gaskets--(1) Charge-Pipe to Intercooler Hose--(1) Intercooler to Throttle Body Hose--(3) Bypass Valve Hoses--(2) 3-in T-bolt Clamp--(2) 3.5-in T-bolt Clamp--(4) Worm Gear Clamps--Mounting Hardware--Mishimoto Lifetime Warranty |
|
TechSpec Overall Height (in)
|
10 |
|
SellingPoint04
|
100-percent aluminum construction with durable cast end tanks TIG-welded to a highly efficient bar-and-plate core |
|
TechSpec Inlet (in)
|
2.5 |
|
TechSpec Applications
|
2015-2021 WRX--2014-2018 Forester XT |
|
TechSpec Installation Notes
|
22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs (2-3NM). Do not exceed the maximum torque rating of 27 in-lbs (3NM) |
|
TechSpec Overall Length (in)
|
24 |
|
TechSpec Weight (lbs)
|
24.5 |
|
Install Difficulty
|
3 |
|
TechSpec Outlet (in)
|
3 |
|
TechSpec Maximum Recommended Boost Pressure (PSI)
|
35 |
|
TechSpec Core Thickness (in)
|
4 |
|
TechSpec Maximum Recommended Horsepower
|
450 |
|
TechSpec Overall Width (in)
|
5 |
|
TechSpec Core Type
|
Bar-and-Plate |
|
SellingPoint10
|
Comes with all necessary hardware, clamps, and brackets for an easy installation |
|
SellingPoint12
|
Cooler available in durable powder-coated Sleek Silver or Stealth Black finish |
|
CARB EO Number
|
D-759 |
|
SellingPoint01
|
Direct fit for the 2015-2021 Subaru WRX |
|
TechSpec Engine Codes
|
FA20DIT |
|
SellingPoint07
|
Includes larger air duct designed to provide optimal airflow to the Mishimoto intercooler core |
|
SellingPoint09
|
Includes new BPV hoses, hot side coupler, and silicone throttle body hose |
|
SellingPoint08
|
Includes the Mishimoto intercooler charge-pipe for maximum airflow and power capability |
|
SellingPoint06
|
Intercooler core designed for maximum cooling efficiency and minimal pressure drop |
|
SellingPoint13
|
Mishimoto Lifetime Warranty |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Centerline Radius
|
N/A |
|
TechSpec Core Height (in)
|
N/A |
|
TechSpec Core Length (in)
|
N/A |
|
TechSpec Pipe Diameter
|
N/A |
|
TechSpec Pipe Length
|
N/A |
|
TechSpec Pipe Shape
|
N/A |
|
SellingPoint11
|
Pre-marked area for NPT sensor |
|
SellingPoint03
|
Proven 15 whp and 8 wtq bolt-on power increase on a stage 2 tune |
|
SellingPoint02
|
Provides 35 F temperature drop compared to stock intercooler on a stage 2 tune |
|
OptionLabel
|
Silver Intercooler, Polished Pipe |
|
TechSpec Note
|
This kit is rated for 300-450 whp with maximum limits of approximately 500 whp, or 35 PSI of turbo boost. Exceeding that horsepower or pressure limit may require a larger front-mount intercooler.----Tuning is not necessary after installing our top-mount intercooler and charge-pipe, but you will see optimal performance if tuning is performed after the intercooler is installed.----The top-mount intercooler will not fit with the stock engine cover due to its larger size. |
|
SellingPoint05
|
TIG-welded to a highly efficient bar-and-plate core |
|
TechSpec Chassis Codes
|
VA |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Cold Side Pipe Inside Diameter
|
3 |
|
Core Thickness
|
4 |
|
Core Length
|
0 |
|
Core Height
|
0 |
|
Core Color
|
Silver |
|
Core Construction
|
Bar-and-Plate |
|
Core Material
|
Aluminum |
|
Coupler Color
|
Black |
|
Coupler Material
|
Silicone |
|
End Tank Construction
|
Cast |
|
End Tank Material
|
Aluminum |
|
Grade Type
|
Performance |
|
Hose Clamps Included
|
Yes |
|
Hot Side Pipe Inside Diameter
|
2.5 |
|
Inlet Diameter
|
2.5 |
|
Outlet Diameter
|
3 |
|
Intercooler Type
|
Air-to-Air |
|
Maximum Boost Pressure
|
35 |
|
Maximum Horsepower
|
450 |
|
Pipe Color
|
Polished |
|
Pipe Finish
|
Powder Coated |
|
Pipe Material
|
Aluminum |
|
Universal Or Specific Fit
|
Specific |
