|
TechSpec Includes
|
(1) Mishimoto Intercooler--(1) Upper Diversion Plate with Mounting Hardware and Rubber Trim Seal--(1) Lower Diversion Plate with Mounting Hardware and Rubber Trim Seal--Mishimoto Lifetime Warranty |
|
TechSpec Engine Codes
|
1.6L EcoBoost |
|
TechSpec Weight (lbs)
|
13.4 |
|
TechSpec Inlet (in)
|
2.55 |
|
TechSpec Outlet (in)
|
2.55 |
|
TechSpec Core Thickness (in)
|
2.59 |
|
TechSpec Applications
|
2014-2019 Ford Fiesta ST |
|
SellingPoint04
|
25-percent increase in internal core volume and 226-percent increase in external fin surface area |
|
SellingPoint02
|
26F (15C) reduction in AIT |
|
TechSpec Core Length (in)
|
28.8 |
|
Install Difficulty
|
3 |
|
TechSpec Maximum Recommended Horsepower
|
325 |
|
TechSpec Maximum Recommended Boost Pressure (PSI)
|
40 |
|
TechSpec Overall Length (in)
|
40.1 |
|
SellingPoint03
|
51-percent increase in core size |
|
TechSpec Overall Width (in)
|
6.15 |
|
TechSpec Core Height (in)
|
6.35 |
|
TechSpec Overall Height (in)
|
6.36 |
|
SellingPoint08
|
All-aluminum, TIG-welded |
|
SellingPoint09
|
Available in Sleek Silver or Stealth Black or Bold Gold |
|
TechSpec Chassis Codes
|
B3 |
|
CARB EO Number
|
D-759-6 |
|
SellingPoint01
|
Direct fit for the 2014-2019 Ford Fiesta ST |
|
SellingPoint11
|
Fits with stock, Mishimoto, or most aftermarket intercooler pipe kits |
|
SellingPoint10
|
Fits with the Mishimoto Fiesta ST Direct Fit Oil Cooler Kit |
|
OptionLabel
|
Gold |
|
SellingPoint05
|
Includes air diversion plates to direct air through the intercooler core for maximum efficiency |
|
SellingPoint12
|
Mishimoto Lifetime Warranty |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Centerline Radius
|
N/A |
|
TechSpec Installation Notes
|
N/A |
|
TechSpec Pipe Diameter
|
N/A |
|
TechSpec Pipe Length
|
N/A |
|
TechSpec Pipe Shape
|
N/A |
|
SellingPoint06
|
Stock location prevents airflow blockage to radiator and AC condenser |
|
TechSpec Note
|
This intercooler is rated for approximately 325 whp. Exceeding these horsepower limits could require a larger front-mount intercooler. The J-line intercooler can be used for horsepower levels exceeding 325whp.--Please note the install guide provided below includes instructions for installation with bumper removal. If you require a guide without bumper removal, please contact our customer experience team. |
|
SellingPoint07
|
Tube and fin construction for added weight reduction over bar and plate cores |
|
TechSpec Core Type
|
Tube-and-Fin |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Outlet Outside Diameter
|
2.55 |
|
Inlet Fitting Gender
|
Male |
|
Outlet Fitting Gender
|
Male |
|
Inlet Tank Material
|
Aluminum |
|
Grade Type
|
Performance |
|
Universal Or Specific Fit
|
Specific |
|
Core Material
|
Aluminum |
|
Core Color
|
Gold |
|
Type
|
Tube-and-Fin |
|
Inlet Outside Diameter
|
2.55 |
|
Width
|
6.15 |
|
Length
|
40.1 |
|
Height
|
6.36 |
|
Core Thickness
|
2.59 |
|
Core Length
|
28.8 |
|
Core Height
|
6.35 |
