|
Install Difficulty
|
3 |
|
SellingPoint03
|
30-percent greater internal volume than stock |
|
TechSpec Chassis Codes
|
Alpha |
|
SellingPoint05
|
Aluminum intercooler pipes replace weak stock plastic and rubber pipes |
|
SellingPoint11
|
Available in polished and wrinkle black |
|
SellingPoint08
|
CNC-machined port for stock sensor connection |
|
SellingPoint02
|
Dyno-proven maximum gains up to 11 whp and 9 wtq on a stock tune |
|
SellingPoint10
|
Includes Mishimoto silicone coupler and Mishimoto T-bolt clamps |
|
TechSpec Engine Codes
|
LTG |
|
SellingPoint07
|
Mandrel-bent aluminum piping |
|
SellingPoint12
|
Mishimoto Lifetime Warranty |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Centerline Radius
|
N/A |
|
TechSpec Core Height (in)
|
N/A |
|
TechSpec Core Length (in)
|
N/A |
|
TechSpec Core Thickness (in)
|
N/A |
|
TechSpec Core Type
|
N/A |
|
TechSpec Inlet (in)
|
N/A |
|
TechSpec Maximum Recommended Boost Pressure (PSI)
|
N/A |
|
TechSpec Maximum Recommended Horsepower
|
N/A |
|
TechSpec Outlet (in)
|
N/A |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Pipe Diameter
|
N/A |
|
TechSpec Pipe Length
|
N/A |
|
TechSpec Pipe Shape
|
N/A |
|
TechSpec Weight (lbs)
|
N/A |
|
SellingPoint09
|
Pre-welded NPT port on cold-side pipe allows for quick install of aftermarket meth injection or boost gauge |
|
TechSpec Note
|
There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information. |
|
TechSpec Includes
|
(2) Aluminum Pipes w/ CNC-machined quick-disconnects--(1) Aluminum Pipe w/ CNC-machined 2-bolt flange--(2) Quick-Disconnect Spring Clips--(1) 2.75-in 90-degree Silicone Coupler--(1) 2.25-in to 2.5-in Silicone Transition Coupler--(1) 2.5-in T-bolt Clamp--(1) 2.75-in T-bolt Clamp--(2) 3-in T-bolt Clamps--Mishimoto Lifetime Warranty |
|
SellingPoint04
|
10-percent increase in flow |
|
TechSpec Installation Notes
|
27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). |
|
SellingPoint06
|
Utilizes stock quick-disconnect fittings for easy installation |
|
OptionLabel
|
Wrinkle Black |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Applications
|
2016-2024 Chevrolet Camaro 2.0T--2013-2019 Cadillac ATS 2.0T |
|
SellingPoint01
|
Direct fit for the 2016-2024 Chevrolet Camaro 2.0T/2013-2019 Cadillac ATS 2.0T |
|
Clamp Quantity
|
4 |
|
Clamp Type
|
T-Bolt |
|
Clamps Included
|
Yes |
|
Cold Side Pipe Inside Diameter
|
0 |
|
Coupler Color
|
Black |
|
Coupler Material
|
Silicone |
|
Finish
|
Polished |
|
Hot Side Pipe Inside Diameter
|
0 |
|
Pipe Bend Type
|
Mandrel |
|
Pipe Color
|
Black |
|
Pipe Material
|
Aluminum |
|
Pipe Quantity
|
3 |
