|
TechSpec Pipe Shape
|
N/A |
|
TechSpec Pipe Diameter
|
N/A |
|
TechSpec Pipe Length
|
N/A |
|
TechSpec Centerline Radius
|
N/A |
|
SellingPoint01
|
Direct fit for 2020+ Toyota GR Supra w/B58 engine |
|
SellingPoint02
|
Reduces restriction by up to 42-percent over stock pipe |
|
SellingPoint03
|
3-in mandrel-bent piping with internal transitions for reduced turbulence and improved flow |
|
SellingPoint04
|
Precision CNC-machined adapters for smooth flow and secure fit |
|
SellingPoint05
|
Included coupler is constructed with steel wire reinforcement to prevent ballooning under high boost pressures |
|
SellingPoint06
|
Two pre-installed bungs can be drilled and tapped for boost sensors, nitrous, or methanol injection |
|
SellingPoint07
|
Two-piece design for a perfect fit and easy installation |
|
SellingPoint08
|
Includes constant-tension worm gear clamps for reliable performance |
|
SellingPoint09
|
Available in micro-wrinkle black or wrinkle red powder coated finish |
|
SellingPoint10
|
Mishimoto Lifetime Warranty |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
2 |
|
OptionLabel
|
Wrinkle Red |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Applications
|
2020+ Toyota Supra 3.0L |
|
TechSpec Engine Codes
|
B58 |
|
TechSpec Chassis Codes
|
A90--GR |
|
TechSpec Maximum Recommended Boost Pressure (PSI)
|
N/A |
|
TechSpec Maximum Recommended Horsepower
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Width (in)
|
N/A |
|
TechSpec Core Type
|
N/A |
|
TechSpec Core Thickness (in)
|
N/A |
|
TechSpec Core Length (in)
|
22 |
|
TechSpec Core Height (in)
|
9.25 |
|
TechSpec Inlet (in)
|
N/A |
|
TechSpec Outlet (in)
|
N/A |
|
TechSpec Weight (lbs)
|
N/A |
|
TechSpec Note
|
The stock O-rings and spring clip must be transferred from the stock pipe. If needed, the O-rings and spring clip can be sourced from Toyota with the following part numbers: 17376WAA05, 17376WAA04, 90118WA186 |
|
TechSpec Includes
|
(2) Mandrel-Bent Aluminum Charge Pipes--(1) Silicone Coupler w/ Steel Wire Reinforcement--(2) Constant-Tension Worm Gear Clamps--Mishimoto Lifetime Warranty |
|
TechSpec Installation Notes
|
22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs (2-3NM). Do not exceed the maximum torque rating of 27 in-lbs (3NM) |
|
Clamp Quantity
|
2 |
|
Clamp Type
|
Worm Gear |
|
Clamps Included
|
Yes |
|
Cold Side Pipe Inside Diameter
|
0 |
|
Coupler Color
|
Black |
|
Coupler Material
|
Silicone |
|
Finish
|
Powder Coated |
|
Hot Side Pipe Inside Diameter
|
0 |
|
Pipe Bend Type
|
Mandrel |
|
Pipe Color
|
Red |
|
Pipe Material
|
Aluminum |
|
Pipe Quantity
|
2 |
