|
SellingPoint05
|
Secondary radiator increases cooling surface area by 27-percent and reduces charge air cooler temperatures by up to 6F |
|
SellingPoint13
|
Mishimoto Lifetime Warranty |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
Install Difficulty
|
4 |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
TechSpec Overall Height (in)
|
N/A |
|
TechSpec Overall Length (in)
|
N/A |
|
TechSpec Overall Width (ins)
|
N/A |
|
TechSpec Core Length (in)
|
N/A |
|
TechSpec Core Height (in)
|
N/A |
|
TechSpec Fluid Capacity (gal)
|
N/A |
|
TechSpec Rows
|
N/A |
|
TechSpec Inlet (in)
|
N/A |
|
TechSpec Outlet (in)
|
N/A |
|
TechSpec Core Thickness (in)
|
N/A |
|
TechSpec Drain Plug Thread Size
|
M12 x 1.5 |
|
TechSpec DPI
|
N/A |
|
TechSpec Material
|
N/A |
|
TechSpec Applications
|
2011-2016 Ford F-250 w/ 6.7L Powerstroke--2011-2016 Ford F-350 w/ 6.7L Powerstroke--2011-2016 Ford F-450 w/ 6.7L Powerstroke--2011-2016 Ford F-550 w/ 6.7L Powerstroke |
|
TechSpec Engine Codes
|
N/A |
|
TechSpec Chassis Codes
|
N/A |
|
TechSpec Note
|
N/A |
|
TechSpec Includes
|
Mishimoto 6.7L Primary Radiator-- Mishimoto 6.7L Secondary Radiator-- Mishimoto Air-to-Water Intercooler-- Mandrel-Bent Cold-Side Pipe-- Mandrel-Bent Hot-Side Pipe-- Upper Coolant Hose with Pre-installed CNC Couplers-- Lower Coolant Hose with Pre-installed CNC Couplers--(2) CNC-Machined Aluminum Quick-Disconnect Couplers--(4) Silicone Boots w/ Duracore™ Technology--(8) Constant Tension T-Bolt Clamps-- Mishimoto Support Bar--(2) Upper Support Bar Mounting Brackets--(2) Cast Thermostat Housings--(2) Magnetic Drain Plugs w/ Dowty Oil Seal--(4) Rubber Bushings & Metal Collars--(3) Hardware Packs--(4) M6 x 1.0 x 16mm Bolts--(12) Black Plastic Tree Clips--(2) Push Mount Cable Ties--Mishimoto Lifetime Warranty |
|
SellingPoint01
|
Direct fit for the 2011-2016 Ford 6.7L Powerstroke |
|
SellingPoint02
|
Includes 6.7L Powerstroke primary radiator, secondary radiator, intercooler, intercooler pipe and boot kit, upper support bar, and silicone coolant hoses |
|
SellingPoint03
|
Primary radiator features extruded tubes with internal struts for increased strength and pressure tolerance |
|
SellingPoint04
|
Primary radiator increases coolant capacity by 37-percent and boasts a 10-percent thicker core than the stock radiator |
|
SellingPoint06
|
Intercooler and pipes increase flow by 22-percent over stock |
|
SellingPoint07
|
Intercooler produces a dyno-proven 40 lb-ft torque gain without other modifications |
|
SellingPoint08
|
Upper support bar improves front-end rigidity, reducing stress on cooling components |
|
SellingPoint09
|
Upper support bar features cast steel anchor points and tube steel center for improved strength |
|
SellingPoint10
|
Coolant hoses are constructed from high-grade silicone with heat-resistant embedded fibers for superior heat and pressure tolerance |
|
SellingPoint11
|
Hoses come with pre-installed CNC quick-disconnect fittings for fast and easy installation |
|
SellingPoint12
|
Patent No. US D966,950 S |
