|
TechSpec Inlet (in)
|
1.57 |
|
TechSpec Outlet (in)
|
1.57 |
|
TechSpec Core Thickness (in)
|
1.65 |
|
TechSpec Core Length (in)
|
14.1 |
|
TechSpec Overall Length (in)
|
17.4 |
|
TechSpec Rows
|
2 |
|
TechSpec Fluid Capacity (gal)
|
2.21 |
|
TechSpec Core Height (in)
|
27 |
|
TechSpec Overall Height (in)
|
27.7 |
|
TechSpec DPI
|
2812 |
|
Install Difficulty
|
3 |
|
SellingPoint01
|
Direct fit for the 2004-2008 Subaru Forester XT |
|
TechSpec Engine Codes
|
EJ255 |
|
SellingPoint02
|
Full aluminum construction with durable, TIG-welded end tanks |
|
SellingPoint06
|
Ideal for use on the street, track, or rallycross course |
|
SellingPoint04
|
Increased fluid capacity and superior heat dissipation |
|
TechSpec Drain Plug Thread Size
|
M12 x 1.5 |
|
SellingPoint11
|
N/A |
|
SellingPoint12
|
N/A |
|
SellingPoint13
|
N/A |
|
SellingPoint14
|
N/A |
|
SellingPoint15
|
N/A |
|
TechSpec Applications
|
N/A |
|
TechSpec Material
|
N/A |
|
TechSpec Chassis Codes
|
SG5 |
|
SellingPoint10
|
Mishimoto Lifetime Warranty |
|
TechSpec Note
|
This item is for Manual Transmission vehicles. For automatic applications, please purchase optional Mishimoto Universal Transmission Cooler Kit.--Caution--The provided Mishimoto two-way cap (six-sided design) should replace the stock cap located on the expansion tank. The Mishimoto Performance Aluminum Radiator should utilize the included one-way cap (circular design with non-directional sticker).--It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact [email protected]. |
|
TechSpec Includes
|
(1) Mishimoto Radiator--(1) Mishimoto Two-Way Radiator Cap--(1) Mishimoto One-Way Radiator Cap--(1)1/16-inch NPT Plug--(1) Magnetic Drain Plug--Mishimoto Lifetime Warranty |
|
SellingPoint03
|
Features a two-row, 1.65” thick efficient brazed aluminum core, providing ideal fluid temperature reduction |
|
SellingPoint05
|
Perfect upgrade to the failure-prone stock plastic end tank radiator |
|
SellingPoint07
|
Now includes two 1.3 bar high-pressure caps, raising the boiling point of engine coolant to provide a safer, more efficient system |
|
SellingPoint08
|
Two-way expansion tank cap and one-way radiator cap ensure proper flow and function of cooling system to avoid overheating |
|
SellingPoint09
|
Includes Magnetic Drain Plug to capture any metallic debris/fragments in your cooling system |
|
TechSpec Overall Width (in)
|
22 |
|
Prop 65 Y/N
|
Y |
|
Prop 65 - Short Label
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
|
Inlet Diameter
|
1.57 |
|
Outlet Diameter
|
1.57 |
|
Core Thickness
|
1.65 |
|
Core Length
|
14.1 |
|
Overall Length
|
17.4 |
|
Core Row Quantity
|
2 |
|
Overall Width
|
2.2 |
|
Fluid Capacity
|
2.21 |
|
Core Height
|
27 |
|
Overall Height
|
27.7 |
|
Core Material
|
Aluminum |
|
Outlet Location
|
Bottom Left |
|
Down Flow Or Cross Flow Type
|
Down Flow |
|
Drain Plug Thread Size
|
M12 - 1.5 |
|
Transmission Oil Cooler Fitting Type
|
N/A |
|
Inlet Location
|
Top Right |
|
Core Finish
|
Uncoated |
|
Drain Plug Included
|
Yes |
|
Transmission Oil Cooler Included
|
Yes |
|
Radiator Cap Included
|
Yes |
